Dual Action Trigger
Description - The dual action trigger requires two different inputs to be received before it sends out a completed signal. Once it has sent a completed signal it will never send another signal unless it has been reset and receives the two inputs again.
Properties: None
Inputs:
Input 1 - This is one of the two inputs that the dual action trigger requires in order to send a trigger. It does not matter in which order it receives these inputs.
Input 2 - See input 1
Reset - This input will reset the dual action trigger so it can be triggered again. It will remove any inputs that have already been activated so both inputs must be activated again.
Outputs:
Complete - This will send a trigger once both inputs have received a signal. Once it sends the Complete signal it will not send another signal unless it has been reset.
Example:
Place a dual action trigger, two Action Buttons and a Party Cannon.
Action Button #1:Pressed => Dual Action Trigger:Input 1
Action Button #2:Pressed => Dual Action Trigger:Input 2
Dual Action Trigger:Complete => Party Cannon:Fireworks
Press Action Button #1. This sends one of the two inputs the dual action trigger needs. Push this button a few more times. Nothing happens.
Press Action Button #2. This was the second input the dual action trigger needs. The Party Cannon will now fire off the fireworks. Push this button a few more times. Nothing will happen as the trigger only works once and then needs to be reset.